Share:
CXS160 C2&3 T3,T160 MD+, FA Protego, Inlet Press. Indicator, Exhaust Temp. Transmitter, Vessel Required
Category:
CXS160 chemical dry pump
Overview:
Edwards pioneered the industrial dry vacuum pump in 1986 and now with more than 150,000 systems sold worldwide this Edwards expertise has been used to develop a dry pump capable of withstanding the harshest of process applications.
The CXS incorporates innovative screw design features with simplicity and reliability in mind, a ‘Plug and Pump’ philosophy has been adopted. As a result, the CXS has industry leading reliability, safety and low cost of ownership.
Features & Benefits:
Technical Data:
Edwards pioneered the industrial dry vacuum pump in 1986 and now with more than 150,000 systems sold worldwide this Edwards expertise has been used to develop a dry pump capable of withstanding the harshest of process applications.
The CXS incorporates innovative screw design features with simplicity and reliability in mind, a ‘Plug and Pump’ philosophy has been adopted. As a result, the CXS has industry leading reliability, safety and low cost of ownership.
Features & Benefits:
- Continuous vacuum from atmosphere to 10-3 mbar
- Integral temperature control
- Pumps corrosive vapours without deterioration
- Excellent liquid and solids handling
- Deeper vacuum than traditional technologies - not limited by seal fluid or cooling water temperature
Technical Data:
| Maximum pumping speed | 160 m3h-1/ 95 ft3min-1 |
| Capacity at 10 mbar (7.5 Torr) | 132 m3h-1 / 78 ft3min-1 |
| Ultimate vacuum | <0.02 mbar / <0.015 Torr |
| Maximum back pressure - standard | 1,200 mbar / 2.7 psig |
| Power consumption at 10 mbar (7.5 Torr) | 3.6 kW / 4.8 hp |
| Standard motor | |
| (200 - 230V ±10%, 3 ph, 50/60 Hz) | 7.5 kW |
| Standard motor | 10 hp |
| (380 - 460V ±10%, 3 ph, 50/60 Hz) | |
| Cooling water flow rate, (adjustable) | 4 - 10 lmin-1 / |
| 1.1 - 2.6 galmin-1 | |
|
Cooling water temperature 5 - 25 oC (41 - 77 oF) for T160 set-ups |
5 – 35oC / |
| 41 – 95oF | |
| Max cooling water supply pressure | 6.9 barg / 100 psig |
| Cooling water supply differential pressure | 1.6 - 5.5 bar / 23 - 80 psi |
| Seal purge flow (max) | 12 std slm / |
| 0.424 std ft3min-1 | |
| Seal purge supply pressure, (min - max) | 2.5 -6.9 barg / 36 - 100 psig |
| Noise (max) with silencer | 64 dB(A) |
| Weight (with frame and standard motor) | 470 kg / 1,034 lbs |
| Process connection, inlet | 3″/DN80 ANSI/DIN |
| Process connection, outlet | 2″/DN50 ANSI/DIN |
Inquiry - CXS160 C2&3 T3,T160 MD+, FA Protego, Inlet Press. Indicator, Exhaust Temp. Transmitter, Vessel Required
View more
CXS160 chemical dry pump
